G6K-2F-RF-V DC4.5

G6K-2F-RF-V Surface-mounting High-frequency Relay 8-GHz Band Miniature DPDT High Frequency Relay for High-speed Differential Transmission Signal Switching • High-frequency characteristics (insertion loss 3 dB or less at 8 GHz) • Miniaturized to 11.7 × 7.9 × 7.1 mm (L × W × H). • Rated power consumption of 100 mW with high sensitivity RoHS Compliant ■Model Number Legend Application Examples • Semiconductor test equipment • Test&measurement equipment • Communication equipment G6K-2F-RF-V —— — — 12 3 4 1. Number of poles/ Contact Form 2: 2-pole/ DPDT (2c) 3. Special Function 1 RF: High-frequency compatible G 6 K 2 F R F V Contact type: Bifurcated crossbar Ag (Surface Au alloy) - 2. Terminal Shape F: Outside-L surface mounting terminals ■Standard type specifications 4. Special Function 2 V: 8-GHz band High-speed differential transmission compatible type - Note. We have a lineup of G6K (U)-2F(P)-RF(-S,-T) products for 1-GHz/3-GHz band high-frequency signal applications. - ■Ordering Information Relay Function Enclosure rating Contact form Model Rated coil voltage Single-side stable Fully sealed DPDT (2c) G6K-2F-RF-V 4.5, 5, 12 VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G6K-2F-RF-V DC5 Rated coil voltage However, the notation of the coil voltage on the product case as well as on the packing will be marked as @@ VDC. Minimum packing unit 40 pcs/tube ■Ratings ●Contacts Item Rated load Rated carry current Max. switching voltage Max. switching current ●High-frequency Characteristics *1 Load Resistive load 125 VAC, 0.3 A 30 VDC, 1 A 10 VDC, 10 mA 8 GHz, 1 W * 1A 125 VAC or 60 VDC 1A * This value is for a V.SWR of 1.2 max. at the load. Item Differential transmission characteristics Single-ended characteristics (reference value) Frequency 8GHz Insertion loss 3 dB max. Isolation 15 dB min. Return loss (V.SWR) 5 dB min. (3.57 max.) Insertion loss 4 dB max. Isolation Between contacts of the same polarity 15 dB min. Between contacts of different polarity 15 dB min. Return loss (V.SWR) 5 dB min. (3.57 max.) Maximum carry power 1 W *2 Maximum switching power 1 W *2 Note 1. The impedance of the measurement system is 50 Ω. (Differential impedance is 100 Ω.) Note 2. The above values are initial values. *1. Contact your OMRON representative if the Relay will be used in an application that requires high repeatability in high-frequency characteristics. *2. These values are for a V.SWR of 1.2 max. at the load. 1 G6K-2F-RF-V Surface-mounting High-frequency Relay ●Coil: Single Item Rated voltage Rated current (mA) Coil resistance (Ω) 4.5 VDC 23.2 5 VDC 21.1 237 12 VDC 9.1 1,315 Must operate voltage Must release voltage (V) (V) Maximum voltage (V) % of rated voltage Power consumption (mW) 194 80% max. 10% min. 150% Approx. 100 Note 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. Note 2. The operating characteristics are measured at a coil temperature of 23°C. Note 3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously. ■Characteristics - G 6 K 2 F R F V Contact resistance *1 Operating time *2 Release time *2 Insulation resistance *3 Between coil and contacts Between contacts of different polarity Dielectric strength Between contacts of the same polarity Between ground and coil/contacts Destruction Vibration resistance Malfunction Destruction Shock resistance Malfunction Mechanical Durability Electrical 100 mΩ max. 3 ms max. (approx. 1.4 ms) 3 ms max. (approx. 0.7 ms) 500 MΩ min. (at 500 VDC) 350 VAC, 50/60 Hz for 1 min 350 VAC, 50/60 Hz for 1 min 350 VAC, 50/60 Hz for 1 min 350 VAC, 50/60 Hz for 1 min - 10 to 55 to 10 Hz, 2.5 mm single amplitude (5 mm double amplitude) 10 to 55 to 10 Hz, 1.65 mm single amplitude (3.3 mm double amplitude) 1,000 m/s2 750 m/s2 50,000,000 operations min. (at a switching frequency of 36,000 operations/hour) 1,000,000 operations min. (10 VDC, 10 mA, at a switching frequency of 1,800 operations/hour) 100,000 operations min. (Other rated load, at a switching frequency of 1,800 operations/hour) -40°C to 70°C (with no icing or condensation) 5% to 85% Approx. 1.16 g Ambient operating temperature Ambient operating humidity Weight Note. The above values are initial values. *1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method. *2. Values in parentheses are actual values. *3. The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength. 2 G6K-2F-RF-V Surface-mounting High-frequency Relay ■Engineering Data ●High-frequency characteristics (differential transmission characteristics) Insertion loss Isolation 1 2 3 0 Return loss (dB) Isolation (dB) Insertion loss (dB) 0 Return loss, V.SWR Sample: G6K-2F-RF-V 10 N.O. N.C. 5 Sample: G6K-2F-RF-V 5 4.5 10 4 Return loss 20 30 6 15 3.5 20 3 V.SWR 25 V.SWR 4 5 0 2.5 40 7 N.O. N.C. 8 10 0 2 35 1.5 40 60 1 2 3 4 5 6 7 8 9 0 10 11 12 1 2 3 4 5 6 7 8 Frequency (GHz) Isolation (dB) 1 2 0 2 3 4 5 6 7 8 1 9 10 11 12 Frequency (GHz) Sample: G6K-2F-RF-V 10 0 N.O. N.C. 5 4.5 4 Return loss 15 3.5 3 V.SWR 6 2.5 30 2 35 1.5 - 25 40 7 N.O. N.C. 8 9 N.O. N.C. 50 Sample: G6K-2F-RF-V 10 0 1 2 3 4 5 6 7 8 9 10 11 12 Frequency (GHz) 60 0 G 6 K 2 F R F V - 20 30 V.SWR 4 5 - 20 Sample: G6K-2F-RF-V 10 3 5 1 Return loss, V.SWR 0 0 9 10 11 12 Frequency (GHz) ●High-frequency characteristics (single-ended characteristics) Insertion loss Isolation Insertion loss (dB) 30 Sample: G6K-2F-RF-V Return loss (dB) 9 N.O. N.C. 50 40 1 2 3 4 5 6 7 8 9 10 11 12 Frequency (GHz) 0 1 2 3 4 5 6 7 1 8 9 10 11 12 Frequency (GHz) Note 1. The high-frequency characteristics depend on the mounting board. Be sure to check operation including durability in actual equipment before use. Note 2. Ambient temperature condition: 23°C. Note 3. The impedance of the measurement system is 50 Ω. (Differential impedance is 100 Ω.) Note 4. S parameter (Touchstone format) data used for circuit simulation is available. Please inquire. 3 G6K-2F-RF-V Surface-mounting High-frequency Relay 250 250 250 150 150 150 100 100 100 50 50 50 0 0 0 -50 50 100 150 200 250 Time (ps) 200 -50 -100 0 300 200 -100 -100 0 20 40 60 80 100 120 140 160 180 200 Time (ps) 0 20 40 60 100 80 120 140 160 Time (ps) Eye Height Eye Width Jitter P-P Eye Height Eye Width Jitter P-P Eye Height Eye Width Jitter P-P 173 mV 121.0 ps 2.5 ps 177 mV 96.5 ps 3.5 ps 147 mV 75.2 ps 4.8 ps 300 250 N.C. Contact 300 250 Voltage (mV) N.C. Contact Voltage (mV) N.C. Contact Voltage (mV) 300 200 -50 300 250 200 200 200 150 150 150 100 100 100 50 50 50 0 0 0 -50 -50 -50 - G 6 K 2 F R F V at 12.5 Gbps N.O. Contact Voltage (mV) 300 Voltage (mV) Voltage (mV) ●High-frequency characteristics (Signal Integrity, differential transmission) at 8.1 Gbps at 10 Gbps N.O. Contact N.O. Contact - -100 -100 -100 0 50 100 150 200 250 Time (ps) 0 20 40 60 80 100 0 120 140 160 180 200 Time (ps) 20 40 60 100 80 140 160 Time (ps) Eye Height Eye Width Jitter P-P Eye Height Eye Width Jitter P-P Eye Height Eye Width Jitter P-P 166 mV 116.0 ps 7.4 ps 172 mV 94.5 ps 5.5 ps 137 mV 74.4 ps 5.6 ps Conditions • 211-1 PRBS signal • Input differential voltage 200 mV • Rise time 25 ps @10 - 90% Note 1. Ambient temperature condition: 23°C. Note 2. The impedance of the measurement system is 50 Ω. (Differential impedance is 100 Ω.) Note 3. This data includes loss due to the test board. ●Propagation delay time Item Propagation delay time (ps) N.O. Contact 107.5 N.C. Contact 115.0 (typical value) Note 1. Ambient temperature condition: 23°C. Note 2. The impedance of the measurement system is 50 Ω. (Differential impedance is 100 Ω.) Conditions Relay input Voltage waveform Rise time 25 ps @10 - 90% 90% 50% 10% Time Relay output waveform Voltage 50% Time Propagation delay time 4 120 G6K-2F-RF-V Surface-mounting High-frequency Relay ■Dimensions (Unit: mm) G6K-2F-RF-V Mounting Dimensions (Top View) Tolerance: ±0.1 mm 11.7±0.2 7.9±0.2 7.1 0.15 1.27 2.54 0.4±0.1 (0.76) (1.68) (5.08) 3.81 5.08 6.35 2.54 1.27 10.16 8.89 7.62 6.35 5.08 3.81 Terminal Arrangement/ Internal Connections TOP VIEW Orientation mark 8 7 6 5 2 3 4 − + 1 8.3±0.2 7.62 8.89 10.16 (9.2) 4.24 Note. Check carefully the coil polarity of the Relay. Note 1. Each value has a tolerance of ±0.3 mm. 0.7 Note 2. The coplanarity of the terminals is 0.15 mm max. Note 3. The dimensions of the printed circuit board work drawing are a recommended example that take soldering into consideration. Frequency characteristics vary depending on the band dimensions, so check the effect on high-frequency characteristics using a test board before use. ■Package specifications Tube Packing G6K-2F-RF-V in tube packing are arranged so that the orientation mark of each Relay in on the left side. Be sure not to make mistakes in Relay orientation when mounting the Relay to the PCB. Orientation of Relays - Stopper (gray) G 6 K 2 F R F V Stopper (green) - Tube length: 520 mm (stopper not included) No. of Relays per tube: 40 pcs 5 G6K-2F-RF-V Surface-mounting High-frequency Relay ■G6K-2F-RF-V Recommended Soldering Method Temperature (°C) ●Recommended Conditions for IRS Method (Surface-mounting Terminals) • The thickness of cream solder to be applied should be (1) IRS Method (Mounting Solder: Lead) between 200 and 250 μm and the land pattern should be based on OMRON’s recommended PCB pattern. • To maintain the correct soldering joint shown in the following diagram, we recommend applying solder with the soldering conditions shown on the left. Soldering 220~ 245 Correct Soldering 180~ 200 Incorrect Soldering Relay Terminal Land Preheating 150 Heel fillet is formed PCB Solder 90~120 (The temperature profile indicates the temperature on the circuit board surface.) Temperature (°C) (2) IRS Method (Mounting Solder: Lead-free) Case top panel (peak): 255°C max. Soldering 250 max. 230 - 180 150 Preheating Relay terminal section 120 max. 30 max. Time (s) (The temperature profile indicates the temperature on the PCB.) 6 Excessive amount of solder Check the soldering in the actual mounting conditions before use. 20~30 Time (s) G 6 K 2 F R F V Insufficient amount of solder G6K-2F-RF-V Surface-mounting High-frequency Relay ■Safety Precautions ●For general precautions on PCB Relays, refer to the precautions provided in General Information of the Relay Product Data Book. Correct Use ●Coating ●Relay Handling • Use the Relay as soon as possible after opening the moistureproof package. (As a guideline, use the Relay within one week at 30°C or less and 60% RH or less.) If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal failure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and seal the package with adhesive tape. • When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent and keep the solvent temperature to less than 40°C. Do not put the Relay in a cold cleaning bath immediately after soldering. • Do not use silicone coating to coat the Relay when it is mounted to the PCB. Do not wash the PCB after the Relay is mounted using detergent containing silicone. Otherwise, the detergent may remain on the surface of the Relay. ●Repeatability • Contact your OMRON representative if the Relay will be used in an application that requires high repeatability in highfrequency characteristics and contact resistance. ●Environmental Conditions for Usage, Storage, and Transport • Avoid direct sunlight when using, storing, or transporting the Relay and maintain normal temperature, humidity, and pressure conditions. ●Long-term, Continuous ON Contacts G 6 K 2 F R F V - • Using the Relay in a circuit where the Relay will be ON continuously for long periods (rather than switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation and can cause a film to develop on the contact surfaces. We recommend using a latching relay (magnetic-holding relay) in this kind of circuit. If a single-side stable model must be used in this kind of circuit, we recommend adding fail-safe circuits in case the contact fails or the coil burns out. - ●Claw Securing Force During Automatic Mounting • During automatic insertion of Relays, be sure to set the securing force of each claw to the following so that the Relay’s characteristics will be maintained. C A B Direction A: 1.96 N max. Direction B: 4.90 N max. Direction C: 1.96 N max. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K290-E1-01 0317(0317)(O) 7